Why is it impossible to go beyond the screen in the Tile class

[Andredron]

Good afternoon, Renpy has a Tile class, where you can set the size:

Img - https://sun9-80.userapi.com/impg/VP-WBr ... type=album

but no matter what size I specify, the output is always a picture with the size of the screen, no more and no less

For example:

Image 1 - https://sun9-22.userapi.com/impg/LIUqxF ... type=album

Image 2 - https://sun9-56.userapi.com/impg/sgaWRw ... type=album

when shifted by half, you can see that the picture is exactly the size of the screen, despite the set size is wider and lower than the screen

if you just specify the color, the same problem comes out

Image 1 - https://sun9-88.userapi.com/impg/S7i1Wa ... type=album

Image 2 - https://sun9-75.userapi.com/impg/ZnlH9x ... type=album

[Mihara]

I think you're actually calling a different Tile - Tile instead of im.Tile, which is the one you've cited the source of.

Either call it as im.Tile -- which is not recommended, since image manipulators are deprecated -- or:

Code: Select all

Composite((width, height), (0, 0), Tile(<displayable>))

[Andredron]

thanks. Me have already been prompted with a solution
I made the graphics strip narrower than the screen so that it would not be visible how the skulls disappear. It worked